FAQ

Worn out roll forming tooling and no drawings?-9

Auxiliary Tooling or Fixtures

08-09-18http://www.chineserollforming.com/FAQ/Floor-Deck-Roll-Forming-china/

Worn out roll forming tooling and no drawings?-8

After the flower pattern is determined, the roll designer inputs the data from the tracings and the measurements into the CAD system to produce the roll form tooling design.

08-09-17http://www.chineserollforming.com/FAQ/Roll-Former-supplier-china/

Worn out roll forming tooling and no drawings?-7

After the shadow-graph tracing is complete, the roll diameter, roll width, angles, and bore size have to be measured and recorded.

08-09-17http://www.chineserollforming.com/FAQ/Roll-forming-machine-manufacturer/

Worn out roll forming tooling and no drawings?-6

The roll designer reviews the product drawing and final profile to generate the new roll form tooling drawing.

08-09-12http://www.chineserollforming.com/FAQ/RollFormers-manufacturer-china/

Worn out roll forming tooling and no drawings?-5

It's also important to know how your current roll form tooling is built.

08-09-12http://www.chineserollforming.com/FAQ/Roll-cutting-machine-china/

Worn out roll forming tooling and no drawings?-4

It is important to know what steel grade the roll form tooling was made of originally.

08-09-11http://www.chineserollforming.com/FAQ/Tile-sheet-forming-machine/

Worn out roll forming tooling and no drawings?-3

The second consideration is spindle wear.

08-09-11http://www.chineserollforming.com/FAQ/Floor-Deck-Roll-Forming/

Worn out roll forming tooling and no drawings?-2

Depending on a couple of factors, the roll form tooling may be recut and dropped, or decreased, in diameter to eliminate wear.

08-09-10http://www.chineserollforming.com/FAQ/Roll-form-machine-china/

Worn out roll forming tooling and no drawings?-1

Depending on a couple of factors, the roll form tooling may be recut and dropped, or decreased, in diameter to eliminate wear.

08-09-10http://www.chineserollforming.com/FAQ/Roll-forming-machinery-China/

Roll form tooling design for air bending-6

In many cases an air bend can be accomplished effectively with a stationary solid mandrel mounted in a conventional roll

08-09-09http://www.chineserollforming.com/FAQ/Metal-roll-former-China/