Custom,Roll,Forming
找到相关文章约106篇，用时1.30秒
106123456››Glazed Tile Roll Forming Lines
Glazed tile roll forming linesGlazed tile roll forming linesMATERIAL:(2) Suitable Coil Thickness: 0.3mm - 0.6mm(3) Suitable Raw Materials: Pre-painted Coil(4) Yield bearing stress: 235MPaMACHINE COMPO..
New Product - admin - 2010-1-25 10:06:15
Sandwich panel rollforming machine
Sandwich panel rollforming machinePolystyrene Sandwich Panel is also called EPS Sandwich Panel,the up down surface of this panel is Galvanized pre-painted steel sheets. Its core material is Polystyr..
Meeting the Standard-1
Five must-have accessories for your next roll formerUsing old roll forming technology is one thing, but its another to use or buy equipment that does not have essential features that now are considere..
FAQ - Jeff Carson - 2008-10-31 16:00:31
How important is sheet and plate steel flatness? -9
What Does the Future Hold?
FAQ - Greg Simpson - 2008-10-31 15:53:42
How important is sheet and plate steel flatness? -8
Experiences With TP-CTLDefiance Metal Products. This Defiance, Ohio-based company operates seven laser cutting machines and six CNC punching systems. Before it began using TP-CTL sheet and plate, a cr..
FAQ - Greg Simpson - 2008-10-30 9:18:33
How important is sheet and plate steel flatness? -7
Test ResultsFigure 4Figure 4). With TP-CTL, flatness was improved 1.5 times in C1010 and 5.5 times in grade 80 material. In other words, as the yield strength of the material increased, the flatter th..
FAQ - Greg Simpson - 2008-10-30 9:17:09
How important is sheet and plate steel flatness? -6
Quantifying the Value of TP-CTL
FAQ - Greg Simpson - 2008-10-28 11:58:43
How important is sheet and plate steel flatness? -5
TP-CTL Lines Already in Place
FAQ - Greg Simpson - 2008-10-28 11:57:29
How important is sheet and plate steel flatness?-4
Combining Temper Pass and Leveling in One Line
FAQ - Greg Simpson - 2008-10-27 10:16:51
How important is sheet and plate steel flatness? -3
What Is Leveling?Figure 3). As the fibers of the steel pass between two alternating, opposing rolls, they are bent in opposite directions in direct proportion to their distance from the neutral center..
FAQ - Greg Simpson - 2008-10-27 10:15:44
How important is sheet and plate steel flatness? -2
What Is Temper Passing?Figure 2 Temper passing consists of compressing flat steel under very high pressure between two work rolls to flatten and elongate steel.Figure 2). A cold reducing process, temp..
FAQ - Greg Simpson - 2008-10-24 10:19:18
How important is sheet and plate steel flatness? -1
Fabricators are specifying temper-passed, leveled steel to remove coil memory
FAQ - Greg Simpson - 2008-10-24 10:16:22
Understanding bending, moving material in roll forming-6
Lessons LearnedFigure 4).Figure 4 Analyzing three flower diagrams (A, B, and C) for a hat profile reveals that the C strategy is the optimal forming process. The sides rotate around the bottom axis a..
Understanding bending, moving material in roll forming-7
In manufacturing a wide product, moving unformed edges laterally is a serious design issue
Understanding bending, moving material in roll forming-7
Figure 5).Figure 5 Forming wide sections is often a bigger challenge than forming narrow sections. The horizontal sections move horizontally. This section has a high moving resistance, which may cause..
New Product - Hanhui Li - 2008-10-23 14:06:58
Understanding bending, moving material in roll forming-6
Lessons LearnedFigure 4).Figure 4 Analyzing three flower diagrams (A, B, and C) for a hat profile reveals that the C strategy is the optimal forming process. The sides rotate around the bottom axis a..
New Product - Hanhui Li - 2008-10-23 14:00:22
Understanding bending, moving material in roll forming-5
Figure 3A), the process stretches the top and bottom edges; the increase in length is . When it is rotated about the bottom axis, the top edge elongates . For the same rotational angle,∆B 2∆C ∆/L,..
Understanding bending, moving material in roll forming-4
Rotational ForcesFigure 3 Two rotational axes are through the center of a section (A) and at the end, or edge, of a section (B). Rotating the section through the center results in the least resistance..
Understanding bending, moving material in roll forming-3
A primary consideration is the workpiece's form and how that form will resist force.
Understanding bending, moving material in roll forming-2
Figure 1Click image to view largerThe flower diagram for a formed box shows two distinct forming actions: rotation and horizontal movement.
Product List
Roll
Forming For Roof And Wall
Glazed Tile Roll
Forming Line
Metal Deck Forming Machine
C-shaped
and Z-shaped Forming
Guardrail Rail Forming Machine
Double-deck Rollformers
Sandwich Panel Line
Additional Equipment
Contact Us
Anyang General International Co., Ltd(AGICO)
E-mail:
info@biodiesel-machine.com
Tel: 86-372-5965148
Fax:86-372-5951936
Add:Suite A, 4/F, Jinhao Business Bld., Renmin Rd. Anyang,Henan,P.R.C.
PC:455000
